Samson 3730-4, Оригинальное руководство пользователя

Страница: 79 / 128

EB 8384-4 EN 79
Operation
The condensed state is displayed represented
by the following icons:
Condensed state Positioner display
Maintenance alarm
Function check
Text e.g. tESting,
TunE or tESt
Maintenance required/
maintenance demanded
Process-related
malfunction/out of
specification
–
No message
–
If the positioner has not been initialized, the
maintenance alarm icon ( ) is displayed as
the positioner cannot follow its set point.
If fault alarms exist, the possible source of
error is displayed in Code 49 onwards. In
this case, Err is displayed.
S
Example:
Error caused by pin position
Refer to the code list (section 14) for possible
causes and the recommended action.
8.3.1 Confirming error mes -
sages
Enable configuration:
If no settings are entered within 120 sec -
onds, the enabled configuration function be -
comes invalid.
Turn
g
Code 3, display: No
Press , Code 3 blinks.
Turn

YES
Press , display:
Confirming error message:
Turn

Select the error code that you
want to confirm.
Press .
The error message is confirmed.
Note