Revision index : C - 1/29/97
- 7 -
Code : RT 6076
2 - INSTALLATION
2.1 - SAFETY RULES
IMPORTANT NOTE ..............This spray gun is only for use with
powder paints.
Use of the powder spray gun must comply with the safety precautions specified in this manual
(refer to articles R233-140 to R233-150 of the Code of Labour Law on paint booths and
powdering).
1 - The spray gun should only be used by trained personnel who are fully aware of the safety
rules specified in this section.
2 - Powder spraying must be conducted in a specially designed and correctly ventilated booth.
The logic control system must link the extractor fan system and the spraying equipment in
such a way as to ensure that spraying is only possible when the extractor fan system is
running.
3 - All conducting material located in the proximity of the spray gun (including, in particular, the
parts being painted) must be connected to the earth associated with the electrical power
supply.
4 - The electrical resistance of all parts for painting, in relation to the earth must be less than or
equal to 1 M
Ω
.
5 - The spraying equipment must be regularly maintained, in line with the instructions in the
manual. Any repair work must fully comply with the guidelines provided by the manufacturer
of the material.
6 - The high voltage current power supply must be turned off before starting to clean the spray
guns.
2.2 - INSTALLING THE EQUIPMENT
Care should be taken to ensure that the equipment is installed in compliance with the safety rules
specified in section 2.1.
