SAMES KREMLIN SRV 028-2-TWIN 60 Скачать руководство пользователя страница 18

Страница: 18 / 21

Revision index : C - 1/29/97

- 18 -

- BF5 - A -

Code : RT 6076

1 - DISMANTLING

- Remove the SRV 028-2-Twin 60

spray gun.

- Loosen the screws (40) and pull the receptacle connector assy (17).

- Disconnect the other end of low voltage cable and take off all parts.

- Loosen the packing box (42).

- Move apart the connector cover (41) and the receptacle connector (17).

- Identify the cable conductors (43) on the receptacle connector (17).

- Unsolder the contacts, remove the cable (43) and keep the packing box (42).

2 - RE-ASSEMBLY

- Install the packing box (42) and the connector cover (41) on the cable (43).

- Solder the cable conductors on the receptacle connector's contacts as per identification.

- Assemble the connector cover (41) and the receptacle connector (17).

- Install and tighten the packing box (42).

- Fasten the receptacle connector (17) onto the fixed flange (13) using the screws (40).

REPLACEMENT OF LOW VOLTAGE CABLE OR SOCKET

Содержание SRV 028-2-TWIN 60






















Результаты поиска

Содержание SRV 028-2-TWIN 60

Отзывы:

Похожие инструкции для SRV 028-2-TWIN 60

Бренды по названию

Популярные бренды

SAMES KREMLIN SRV 028-2-TWIN 60, Инструкция по эксплуатации

Результаты поиска

Содержание SRV 028-2-TWIN 60

Отзывы:

Похожие инструкции для SRV 028-2-TWIN 60

Бренды по названию

Популярные бренды