Operator’s manual
Trailed tedder
P4-471 C P4-531 C P6-771 C
- 26 -
6.
MOUNTING AND ADJUSTMENTS
6.1. Mounting of the tines
The tines should be mounted according to the scheme shown in
Fig. 23 and Fig. 24
.
Fig. 23.
Mounting of the tines P4-471C and
P4-531 C
Fig. 24.
Mounting of the tines P6-771 C
NOTE:
Use only the tines recommended by the manufacturer.
NOTE:
Due to various rotor rotation directions, prior to mounting tines, check rotation directions of
each rotor (
Fig. 23 and Fig. 24
).
6.2. Daily maintenance
Everyday after work please carry out the following maintenance:
check all visible units and parts and their connections; tighten all loose bolts and nuts and
replace all damaged and/or worn parts with new genuine ones,
clean the tedder each day after working,
remove grass and mud,
check the rotors,
grease PTO shaft tubes with STP grease,
if necessary, lubricate the parts and units according to lubrication instructions (chapter 7).
