Operator’s manual
Trailed tedder
P4-471 C P4-531 C P6-771 C
- 11 -
Fig. 7.
Location of center of gravity, tedder’s catching points (for: P6-771C)
WARNING!
Securing the maneuver area and providing safety for operation performed is
the responsibility of the person in charge of moving of the machine.
4.5. Working parts
Before operating the tedder check rotors’ and tines’ condition.
Worn or damaged tines should be immediately replaced with new ones.
WARNING!
During replacement of working parts, it should be used personal protective
gloves
.
4.6. PTO shaft
Before operating, read bar manufacturer's manual placed on the bar. Follow all safety
precautions in that manual.
Use only PTO shafts recommended by tedder’s manufacturer with guards in good condition.
In order to operate safely, use only undamaged PTO shafts and shields. Damaged PTO shafts
and shields must be repaired or replaced with new ones before use.
Before any operation make sure whether PTO rpm have proper rotational direction.
4.7.
Hydraulic assembly
Note! Hydraulic assembly is under pressure! Hydraulic oil under pressure may permeate
through skin and cause serious injury, therefore skin and eyes should be protected in particular.
In case of injuries caused by liquid under pressure, call a doctor immediately.
Hydraulic hoses can be connected to tractor's hydraulics, provided that both the tractor's and the
tedder's hydraulic assemblies are not under pressure. To remove the pressure from the hoses just
simply restart the tractor's hydraulic valves several times, once the tractor is off.
1
4
7
0
m
m
2630 mm
