Operator’s manual
Trailed tedder
P4-471 C P4-531 C P6-771 C
- 22 -
5.4. Switching from transport to working position
WARNING!
Moving the tedder to and from operating position from the transport position
should only take place on even and stable ground. Prior to making the moves
make sure whether there are no unauthorized persons exposed to any
hazardous moving parts.
make sure there is nobody around in the place where you are going to lower the tedder,
by means of cord
L
unlatch the locks
Z
(
Fig. 17
) at the same time pulling down the hydraulic
cylinders,
by means of hydraulic cylinder lower the rotors until they are on the ground in a possibly slow
way.
Fig. 17.
Unlatching the lock by means of a cord
SaMASZ tedders are equipped with repellent mechanism for mobile tedder arms. Thanks to
it, arms can be folded with no need of leaving the tractor cabin. It may however be limited by
the slope, on which the machine is being folded. Presumably, the mechanism shall operate well on
slopes of up to 4° (
Fig. 18
).
Fig. 18.
Tedder folding mechanism limitation
L
Z
Automatic
unfolding
