en
43
Fitting the parts
.
Insert the seal for the cooking compartment
door.
.
Hook the drip tray in place.
.
Hook the shelf-support rails in place.
Placement of the core temperature sen-
sor if not used
.
If the core temperature sensor is not requi-
red for the cooking process,
−
fix the cable on the hook and
−
insert the core temperature sensor in the
holder.
D
For the use of the core temperature sensor,
see page 48 section 3.5
Closing the cooking compartment door
D
Do not slam the cooking compartment door.
Crush hazard.
Do not grip between the
cooking compartment door and the cooking
compartment when closing the cooking com-
partment door. Do not reach into the locking
mechanism when locking the door.
.
Close the cooking compartment door and
lock with the locking lever.
D
The seal must be replaced or the cooking
compartment door be readjusted by the cu-
stomer service if the cooking compartment
door no longer has sufficient tension or if
steam is escaping.
Shelf-support
rails
Drip tray
Seal
Seal
Shelf-support
rails
Core temperature sensor
Holder
Hook
Locking lever
Closing
mechanism