en
62
9.
Troubleshooting
If faults should occur on this appliance, check them using the following table:
Fault
Possible cause
Remedy
Main switch on front of the app-
liance is not turned on.
Turn on the main switch.
There is no power supply at all.
Contact the power supply company
The circuit breaker has tripped.
Have possible appliance faults checked
by an authorised customer service.
Reset the circuit breaker.
The appliance is
switched on but
does not heat.
An upstream energy optimising
unit has not switched on the
heating.
Check the energy optimising unit.
Water is not
draining out of
the cooking com-
partment.
The outlet is blocked.
Clean the outlet screen.
The cooking
compartment
walls are scaled
up.
The softener is exhausted or in-
correctly set.
Regenerate the softener and have it
adjusted by the authorized customer ser-
vice.
Stains in the coo-
king compart-
ment
Seasoning added before coo-
king.
Add seasoning after cooking.
Steam escaping
from the door.
The seal has broken down or is
faulty.
Replace the seal on the cooking compart-
ment door.
For the display of error numbers, see page 63 section 9.1
If you cannot resolve the fault,
−
turn off the appliance and disconnect from the mains,
−
do not open the housing,
−
contact customer service.