7-7
Module 2 – Wireless Accessories
SS901ZB Water Leak Sensor
Section 7
Resetting Factory Defaults
Step 4.
Unscrew the
SS901ZB face plate .
Step 5.
Remove the
battery .
Step 6.
Insert the battery
while holding the tamper
switch .
Step 7.
Screw the face
plate onto the sensor
making sure it is fully
locked and sealed .
Step 1.
PressSelect the
SS901ZB icon from the SALUS
Smart Home dashboard . After
the tile flips, choose the device
name in the upper left .
Step 2.
Scroll to the bottom
of the next screen and select
“Remove Shared Water Leak
Sensor .”
Step 3.
Notification that the Sensor
will be removed is displayed . Press
“Delete” to continue . The SS901ZB
Icon will be removed from the
application .
After this, the sensor has been reset to factory default settings and will respond to pairing requests .