4-5
Resetting Factory Defaults
Module 2 – Wireless Accessories
SX885ZB miniSmartPlug
Section 4
Step 1.
First, delete the device
from the SALUS Smart Home
application . Select the device to
delete, choose the device title for
the configure screen .
Step 2.
Scroll down below the
Schedule options and choose,
“Remove Shared Smart Plug” .
Step 3.
A notification will
appear warning that you are
about to delete the Smart Plug .
Press “Delete” to continue .
Step 4.
Press and hold the multi
button on the SX855ZB Smart Plug .
Step 5.
When the LED illuminates,
release the button . The Smart Plug is
now read for pairing .
LED
Multi
Button
Rejoining a Current Network
If the network connection is intermittent and/or other Zigbee devices are added or deleted, it may
be necessary to for the SX885ZB Smart Plug to rejoin the network . To do this, press the multi button
5 times quickly (less than ½ second intervals) . The LED will begin 3 flash intervals, indicating it is
searching for a network to join .
LED Indications
Table 4.1 – LED Indications
LED Activity
Description
ON for 2-4 seconds then OFF
Switch power up, Switch is OFF
3 flashes
Searching for network to join
ON
Switch is ON
OFF
Switch is OFF
ON , flashes every 2 seconds
Switch is ON , no network detected
OFF , flashes every 2 seconds
Switch is OFF , no network detected