3-6
Module 2 – Wireless Accessories
SS882ZB Door/Window Sensor
Section 3
Resetting Factory Defaults
To reset the SS882ZB Door/Window Sensor to factory default values, first remove the sensor from the
SALUS Smart Home application .
Step 3.
Notification that the
Sensor will be removed is
displayed . Press “Delete” to
continue . The SS882ZB Icon
will be removed from the
application .
Step 4.
Remove the Sensor
from the Mounting Plate
and remove the battery .
Step 1a.
If the Sensor is pinned
to the SALUS Smart Home
application dashboard, select it
and then select the tile label in
the upper left corner .
Step 1b.
If the Sensor is not on
the dashboard, choose Menu
All Devices and find the Sensor .
Click on the icon .
Step 2.
Scroll down and
choose “Remove shared
window monitor” from the
screen .
Step 5.
While holding down
the Tamper Switch, re-insert
the battery and, when the LED
illuminaes, release the switch .
The Sensor is no ready to join
a network . Follow the pairing
sequence to join the network .
Step 6.
Snap the Sensor onto
the Mounting Plate observing
the proper orientation of the
round corners .