Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
21
1.
Saluki mark
2.
Display Format:
3.
Acquisition Mode: Normal, Peak Detect or Average
4.
Trigger Status:
The oscilloscope is acquiring pretriggered data.
All pre-triggered data have been acquired and the oscilloscope is ready to accept a trigger.
T
The oscilloscope has detected a trigger and is acquiring the posttrigger information.
The oscilloscope works in auto mode and is acquiring waveforms in the absence of triggers.
The oscilloscope is acquiring and displaying waveform data continuously in scan mode.
●
The oscilloscope has stopped acquiring waveform data.
S
The oscilloscope has finished a single sequence acquisition.
5.
Tool Icon:
: If this icon lights up, it means the keyboard of the oscilloscope is locked by the host computer via USB
control.
: If this icon lights up, it means the USB disk has been connected.
: This icon lights up only when the USB slave interface is connected with the computer.
6.
Main Time Base Window
7.
Display of window’s position in data memory and data length.
8.
Window Time Base
9.
Operating Menu shows different information for different function keys.
10.
Readout shows frequency count.
11.
Readout points out horizontal waveform position
12.
Trigger Type:
:
Edge trigger on the rising edge.
: Edge trigger on the falling edge.
: Video trigger with line synchronization.
: YT
: Vectors
: Gray indicates auto persistence; Green means persistence display is enabled. When the
icon is set to green, the time for persistence display will be shown behind it.
:
XY
:
Dots
