Salicru SLC CUBE 4, Руководство пользователя

Страница: 2 / 78

2
SALICRU
General index
1. INTRODUCTION
1.1. THANK-YOU LETTER
2. SAFETY INFORMATION
2.1. USING THIS MANUAL
2.1.1. Conventions and symbols
2.1.2. Safety considerations
3. QUALITY ASSURANCE AND STANDARDS
3.1. MANAGEMENT STATEMENT
3.2. STANDARDS
3.2.1. First and second environment
3.2.1.1. First environment
3.2.1.2. Second environment
3.3. UKCA PRODUCT MARK AND UK AUTHORIZED
REPRESENTATIVE.
3.4. ENVIRONMENT
4. PRESENTATION.
4.1. VIEWS OF THE CABINETS
4.1.1. UPS cabinets
4.1.2. Battery cabinets
4.2. PRODUCT DEFINITION
4.2.1. UPS and battery module nomenclature
4.3. UPS CHARACTERISTICS LABEL
4.4. UPS DESCRIPTION
4.4.1. General description and block diagram
4.4.2. Rectifier-booster
4.4.3. Inverter
4.4.4. Batteries and battery charger
4.4.5. Static bypass
4.4.6. Manual or maintenance bypass
4.5. OPERATING MODES
4.5.1. Normal mode.
4.5.2. Battery mode
4.5.3. Bypass mode
4.5.4. Maintenance bypass mode
4.5.5. ECO mode.
4.5.6. Frequency converter mode
4.6. OPERATION AND CONTROL DEVICES
4.6.1. Switches
4.6.2. Control panel with touchscreen
4.6.3. External interface and communications
5. INSTALLATION
5.1. RECEPTION
5.1.1. Reception, unpacking and contents
5.1.2. Storage
5.1.3. Unpacking.
5.1.3.1. 30-40 kVA equipments.
5.1.3.2. 50-80 kVA equipments.
5.1.4. Transport to the site
5.1.5. Siting, immobilisation and considerations
5.1.5.1. Siting for single units
5.1.5.2. Siting for parallel systems
5.1.5.3. Immobilisation and levelling of the unit
5.1.5.4. Preliminary considerations before connection
5.1.5.5. Preliminary considerations before connection, regarding
the batteries and their protection devices
5.2. CONNECTIONS
5.2.1. 30-40 kVA equipments.
5.2.2. 50-80 kVA equipments.
5.2.3. Connection to the mains, input terminals (see
Fig. 41 and
Fig. 45 ).
5.2.4. Connection of the separate static bypass line. SLC CUBE4 B
version ( Fig. 42 and Fig. 46) .
5.2.5. Connection of the output, output terminals (see Fig. 41, Fig.
42, Fig. 45 and Fig. 46 ).
5.2.6. Connection of the unit's battery terminals to those of the
battery module ( Fig. 10 and Fig. 11) .
5.2.7. Connection of the parallel bus
5.2.8. Interface and communications
5.2.8.1. Digital inputs, relay interface and communications
5.2.8.2. Installation of SNMP cards
6. OPERATION
6.1. UPS START-UP
6.1.1. Checks before start-up
6.1.2. Initial start-up
6.1.3. Generic start-up procedure (normal mode).
6.1.4. Procedure for transferring to bypass mode
6.1.5. Procedure for transferring to normal mode from bypass
mode
6.2. PROCEDURE FOR STOPPING THE UPS
6.3. MANUAL OR MAINTENANCE BYPASS
6.3.1. Transferring to maintenance bypass mode