Salicru EQUINOX EQX2 4002-HT, Руководство пользователя

Страница: 63 / 108

63
EN
      
175 mm.
Fig. 4. Bottom view
Rear
rail
Ventilation
valve
Fig. 5. Rear view.
The connection terminals are located at the bottom of the unit,
as shown in the following table:
Item Terminal Note

DC switch On/Off switch

DC input terminal PV Connector

Battery input
terminal
Battery connector

COM1 port WiFi connector

COM2 port CT/RS485 connector

AC Back-up output
terminal
Connection for AC output

AC grid output
terminal
Connection for AC output
Tab. 4. Connection terminals.
4.3. SCREEN INTERFACE AND
WIFI MODULE.






Fig. 6. Synoptic chart view.
Item Indicator Status Description

Battery
level
indicator
Off Battery not connected or communication error.
Always On
Battery in discharge or standby mode,
the indicator shows the battery level.
Single flash
Battery charging, the indicator shows
the battery level.

Power
indicator
Off Inverter without AC output.
Fast flash Inverter in self-test status.
Slow flash Inverter in standby status.
Always On Inverter in normal status.

Grid
indicator
Off Disconnected from the grid.
Slow flash Grid detected but not in grid mode.
Always On Operating in grid mode.

Alarm
indicator
Off The inverter operates normally.
Slow flash
The monitoring device is not connected
to the router or base station.
Fast flash
The monitoring device is connected to the router
or base station, but not to the server.
Orange
A warning is detected with the inverter
operating, see the defect on the display.
Red Alarm or fault detected, see them on the display.

Display
On Displays inverter operation information.
Off
Display off to save power, press to make
it reappear.

Button Physical
Switch between display information and
parameter setting with a short or long press.
Fig. 7. Interface functionalities.
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID USER MANUAL