Salamander Pumps RP100PT Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 29

Salamander Pumps RP100PT Скачать руководство пользователя страница 3

Pump installation and warranty

guide for Right Pumps

Important – read this first!

Correct installation is the guarantee of safety and a trouble free
system. It is therefore important to read these instructions thoroughly
and ensure you comply with them. Incorrect fitting can invalidate the
warranty.

Pages 10 to 11 of this manual provide clarification of some of
the more unusual installation requirements. If your installation
is complicated or you have any questions please CONSULT THE
PUMPWISE HELPLINE IMMEDIATELY.

We encourage installers to consult the PumpWise helpline, where
our engineers can give you first-rate advice regarding installation.
Consulting the helpline at the time of installation could entitle your
customer an additional year’s warranty FREE (UK only) – all you have
to do is call us, implement our engineers recommendation for your
installation situation, then ask your customer to register.

When the job is finished – tear off the final page of this instruction
manual and hand it to the householder. This page explains the
warranty provisions and provides a pre-paid warranty card.

Don’t forget that if you have called our helpline you should also
complete the comments section of the card to say how you rate the
service you received.

Please leave this installation guide with the customer for reference to
maintenance and safety information.

Thank you for choosing
Salamander Pumps

!

«
1
2
3
4
5
...
»

Содержание RP100PT






























Отзывы:

Нет отзывов