Sakura Tissue-Tek TEC 6, Инструкция по эксплуатации

Страница: 84 / 104

84
Descriptions of Additional Codes
Additional code Description (Applicable location)
01 Cooling plate (Cryo Module)
02 Paraffin chamber (Embedding Module)
03 Left side warming chamber (Embedding Module)
04 Right side warming chamber (Embedding Module)
05 Left side hot plate (Embedding Module)
06 Right side hot plate (Embedding Module)
07 Paraffin line (Embedding Module)
08 Dispensing solenoid valve (Embedding Module)
09 Dispenser (Embedding Module)
10 Forceps holder (Embedding Module)
11 Hot plate heater
21 Set value data
22 Operation status data
23 Dispensing log data
24 Error log data
25 Temperature record data
Buzzer Notification
This instrument notifies the following events with a buzzer sound.
Type of notification Notification sound Condition for notification How to stop
Startup notification Short beep The display has started after the
power was turned on.
(Approx. 15 seconds later) Stops automatically.
Start notification Short beep The TEC 6-EM is operating. Stops automatically.
End notification Short beep Auto operation has ended. Stops automatically.
Dispensing notification 3 short beeps An attempt was made to perform
dispensing operation when dispensing
was not possible. Stops automatically.
Paraffin solidified
notification 15-second continuous
beep
The paraffin solidification process
was complete in the cleaning mode. Stops automatically or by
toughing the “
” (stop) button.
Paraffin heated
notification Intermittent short beeps
(for one minute)
The paraffin melting process was
complete in the cleaning mode. Stops automatically or by
toughing the “
” (stop) button.
Error notification
(Caution) One-minute continuous
beep
An caution-level error occurred Stops automatically or by
toughing the “
” (stop) button.
Error notification
(Warning) Continuous beep An warning-level error occurred. Touch the “ ” (stop) button.
NOTE:
The buzzer notification cannot be disabled. The volume of the
buzzer is fixed.