Sakura Tissue-Tek TEC 6, Инструкция по эксплуатации

Страница: 55 / 104

3. Explanation of Operations
55
3.1 Explanation of Operations
3.1.1 Basic Operations
The following explains the day-to-day embedding process and the operations/
tasks that must be performed before/after the embedding process.
This instrument is commonly operated in the auto mode. In auto operation,
normally the power switch remains on and the controls are started/stopped
automatically at the preset start/end times.
Preparations before Use
When the instrument is used for the first time or after the instrument has
been cleaned, paraffin must be added into the instrument and melted. If the
necessary quantity of molten paraffin* is already available, proceed to the
embedding process. (*Approx. 2.5 kg in Paraffin chamber)
1. Turn on the respective power switch on the Embedding Module and Cryo
Module.
2. The Start screen is displayed.
3. If “Manual” is displayed (manual operation), touch the “Heat” button [1].
OR, touch the “Main Menu” button [2] and the “Auto” button [3] on the
Main Menu screen.
[1]
[2]
[3]