manualshive.com logo in svg

Sakura Tissue-Tek TEC 6, Инструкция по эксплуатации

Поделиться
Скачать
Sakura Tissue-Tek TEC 6 Скачать руководство пользователя страница 30

30

[6] Close  button
  Use this button to return to the 

Operation screen.

[1] Date & Time Settings button 
  This button can be used to set 

the date and time. Refer to 

2.2.2 

Setting the Date and Time

 for 

details.

[2] Language Settings button
  This button can be used to 

select the display language. 
Refer to 

2.2.4 Setting the 

Display Language

 for details.

[3] Date Format Settings button
  This button can be used to set 

the order of year, month and day 
and the 24-hour display or 12-
hour display mode. Refer to 

3.2.1 

Various Settings

 for details.

[4] Auto Panel Display Off Settings 

button

  This button can be used to set 

the time until the panel display 
turns off. The panel display can 
also be set to never turn off. 
Refer to 

2.2.5 Setting the Auto 

Panel Display Off Timer

 for 

details.

[5] Error Log button
  Use this button to display the 

error log. Refer to 

4.1.1 Viewing 

the Error Log

 for details.

[6] Close  button
  Use this button to return to the 

Operation screen.

•Maintenance Menu screen (common)

[1]

[4]

[2]

[5]

[3]

[6]

Содержание Tissue-Tek TEC 6









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды