SAFETY NOTES
Do not connect or disconnect sensor cables or attenuators in the probe head while they are
connected to a voltage source to avoid the risk of shock.
Remember that all metallic parts in the probe head are at the same potential
This product is not intended for detection of hazardous voltages.
The probe head is not meant to be used as a handheld unit
Do not use the probe for measurements on mains circuits as it is not CAT rated.
Do not use in wet or explosive atmospheres.
Do not connect the probe or attenuators to any circuit that exceeds the probe ratings
The probe can be floated at very high voltages, please consider all clearances before making
any measurements
Do not open the probe head or receiver, they do not contain user-serviceable parts inside
Fiber cables can break if bent at sharp angles, take care not to trip over the fiber cable that
joins both receiver and probe head
The unit contains electrooptical components, do not shock or drop the probe onto the floor
It is always recommended that the probe head be installed over a tripod mount and secured
When manually positioning the probe head keep in mind the unit is physically joined to the
receiver unit, moving the probe head may send the receiver into the floor
BR-XFVP-Rev 6. 12/22
This product is intended to be used only by trained personnel
WARNING
CAUTION
