The probe head unit uses standard 1.5V AA batteries, either good alkaline batteries or
>2500mAh NiMh batteries are recommended. To replace the batteries open the back cover of
the unit. Follow the polarity sign to replace the batteries and close the cover afterwards.
CARE AND MAINTENANCE
Clean only the exterior surfaces of the device using a soft cloth moistened with an alcoholic/
water solution. Do not use harsh chemicals, solvents, or abrasive cleansers. To prevent damage
to the measurement system, do not expose it directly to sprays, liquids, or solvents. Avoid
getting moisture inside when cleaning the exterior. Dry the probe before making any voltage
measurements. The probe is not waterproof.
The fiber cables should never be disconnected. The boots in the cables protect the connectors
from movement, shock and dust.
There are no serviceable parts inside the probe. Return the probe in case probe fails to meet
its specs or does not operate. Opening the probe voids the warranty.
EQUIPMENT CODES
CODE
Description
XFVP20-2
XFVP probe 220MHz with 0.5m output BNC cable, SMB unterminated
cable, x10 attenuator, 2xAA batteries, tripod, quick guide, case, USB
cable. Fiber cable 2m in length available up to 15m
XFVP10-x
Same as XFVP20-2 probe but 110MHz BW
BR-XFVP-Rev 6. 12/22
REMOVE THE BATTERIES FROM INSIDE THE EQUIPMENT IF IT IS TO BE STORED
DURING MORE THAN 5 MONTHS
