Sagola PREMIUM 30, Инструкция по эксплуатации

Страница: 30 / 110

ENGLISH
10. Stopping and cleaning
1. Disconnect the pressure pot from the air compressor.
2. Despressurise the pressure pot by first turning wheel (1)
and then wheel (2).
3. Once the pressure pot is open, clean with the appropiate
thinner.
4. Close it again and perform the start-up rouline, re-
circulating the thinner through the hoses and guns, as many
times as necessary.
11. Maintenance
Before starting to work, verify the state of the product hoses and the connections of the ele-
ments through which the product flows.
In order to carry out maintenance or repairs, first disconnect the unit from the compressed air
distribution network .
Never move the unit by dragging it by the hoses .
Do not apply excessive force or inadequate tools for maintaining and cleaning the unit. Some
repairs must be done with special tools on some occasions. In these cases, you must contact the
Customer Service of SAGOLA . Any handling of this product by non-authorised personnel would
render the warranty null and void.
The unit must be overhauled on a regular basis to check the status of its components and repla-
ce these when they are not in perfect condition.
Do not use graphite greases as they dry out the joints, altering their operation.
IN ORDER TO OBTAIN THE BEST POSSIBLE RESULTS, ALWAYS
USE ORIGINAL SAGOLA SPARES THAT GUARANTEE TOTAL
INTERCHANGEABILITY, SAFETY AND PERFECT OPERATION.
1
2
Recirculate
diluent
Frequency
Description
Start
operation
Weekly Monthly Operation
Lid packing Check
conditions
Connections Inspection
and tightening
Hoses Check condi-
tions
Pressure regulators Check condi-
tions
Safety valve Visual check
Discharge valve Visual check