- 18 -
ATLANTA 800 G
Petrol engine
HONDA GX 160, 4 stroke, 1 cyl.
Cubic
capacity
163
cm3
Diameter
x
stroke
68x45
mm.
Motor power
4,000 watts / 4,000 r.p.m.
Maximum torque
1.1 Kgm / 2,500 r.p.m.
Fuel
consumption
230
g/psh
Cooling
system
Forced
air
Ignition
system
Transistorised
magneto
Shaft turning direction
Anticlockwise
Motor housing oil capacity
0.60 liters type SAE 10W-30
Motor reducing gear capacity
0.50 liters type SAE 10W-30
Fuel
tank
capacity
3.6
liters
Pump
housing
oil RENOLIN
MR-10
Pump housing capacity
Min. 2 L - Max. 2.4 L
Adjustable pressure
0 - 220 bar
Air
flow
8
L/min.
(water
viscosity)
Product inlet
Metric thread 36 X 2 male
Product outlet
Thread GAS 1/4 BSP male
Maximum recommended cap pitch
0.036”
Maximum cap pitch with two guns
0.026”
Gross
weight
76
Kg
Dimensions
1,100 x 750 x 900 mm
Approvals
1. WARNING
This unit belongs to the family of devices designed to spray
products with high pressure which is used for the airless
spraying (airless) various coating materials, operated by
means of a spray gun. They provide a high level of product
transfer and excellent quality finish, as well as low levels of
contamination.
The equipment consists of the following standard features:
- Pump model ATLANTA 800 G
- Instruction manual
- Case
As optional and complementary elements of the equipment,
in this Manual the following are included:
- Product hoses
- Road marking Kit
- Airless Gun
- Spray air caps:
- Fixed tips
- Swivel caps (Self-cleaning).
2. INTRODUCTION
Unit featuring a combustion engine that activates the
hydraulic device which provides the pressure necessary to
spray the product.
The unit is supplied with a
suction probe, which is inserted
directly in the container of the product to be applied.
3. TECHNICAL DETAILS
Before starting the unit you must read, take into considera-
tion and comply with all the indications described in this
Manual.
This manual must be kept in a safe place, accessible to all
users of the unit.
The unit must be started and handled exclusively by
personnel instructed in its use and must be employed only
for the purpose for which it was designed.
Likewise, accident prevention standards, work centre
regulations and directives and current legislation and
restrictions must be taken into consideration at all times.
SAGOLA S.A., the SAGOLA logotypes and other SAGOLA
products mentioned in this manual are registered trademar-
ks or brand names of the company SAGOLA S.A.
