- 19 -
4. COMPONENTS
1 Suction Probe
2 Product cup 25L (OPTIONAL)
3 Product return hose
4 Product return key
5 Presure regulator
6 Product Outlet
7 Pressure Gauge
8 Product inlet
9 Non-return valve
10 Valve
11 Duralumin screws
12 Polyamide membrane
Fig.1
5. WARNINGS
- Before putting the unit into operation, and especially after
each cleaning and/or repair operation, a check must be
made that the equipment components are securely tighte-
ned and that the hoses are airtight (no leaks). Faulty parts
must be replaced or repaired as appropriate.
- This equipment is for PROFESSIONAL use only. USE
AND MAINTENANCE must be carried out by qualified staff
WHO HAVE READ AND UNDERSTOOD the IMPOR-
TANT information relating to the SAFETY OF PERSON-
NEL AND EQUIPMENT described in this manual. Follow
the application methods indicated to obtain the required
quality of finish.
- Before putting the unit into operation, we recommend that
you clean the equipment as this has been subjected to
functional tests and before packaging it is treated internally
with a protective coating, some of which may still remain.
Apply thinner to eliminate this. Remove any residual
grease applied during assembly.
- The unit is depressurised when supplied (no pressure
inside).
- Ensure that the products to be applied are chemically
compatible with the components these come into contact
with (aluminium, stainless steel, polythene).
- Do not use corrosive or abrasive products.
-
Use SAGOLA anti-static hoses.
You must always connect the equipment and all the
elements involved in the work process to a grounding
connection to eliminate static electricity. Regularly verify
(one a week) its electrical continuity. If its resistance
exceeds the recommended limits, it must be fixed. An
equipment unit without or with a faulty grounding connec-
tion may make the installation dangerous.
- The unit has been designed for long service and can be
used with most products available on the market. Its use
with highly aggressive products will quickly increase the
need for maintenance and spare parts. If you need to apply
special products, please contact SAGOLA S.A.
- Read and apply all the information, instructions and
safety measures indicated by the manufacturer of the
products to be applied (products to be applied, thinners,
etc.) as these may provoke chemical reactions, fires and/or
explosions, or be toxic, irritant or harmful and in all cases
dangerous for the health and personal safety of the user
and of other persons nearby (see chapter on Safety and
Health).
- Mix, prepare and filter the product to be applied in accor-
dance with the manufacturer's instructions, ensuring that
any foreign bodies are prevented from spoiling the quality
of finish and application. Should there be any doubt related
to the purity of the product, its composition, etc. please
contact your supplier.
- Control the viscosity of the product to be applied with the
SAGOLA Viscosimeter kit- Code 564 180 01.
- With this equipment, products are treated at very high
pressures. The jet sprayed from the gun, through leaks or
from the breakage of any component may cause the
product to be injected through one’s skin at high pressure.
NEVER aim the gun toward a person or toward oneself.
NEVER insert hands or fingers in the cap.
NEVER attempt to remove the gun during rinsing, this is
NOT a pneumatic system.
- ALWAYS follow the decompression procedure described
below before cleaning or removing the cap or carrying out
maintenance works on any part of the equipment.
- Ensure the safety devices of the equipment function
correctly before each use.
2
1
3
4
5
5
9
10
11
12
6
7
8
5
