Parameters in the file para.ini: advanced configuration
TELSAT GPRS
99
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
CHx_TX_VOICE_LEVEL (Signal directed to the remote station)
CHx_RX_VOICE_LEVEL (Signal directed to your local equipment)
You can set the parameter for both ports separately.
Section: DIALING
Meaning Parameter
Permitted
Values
Factory Setting
Tx Level *(-1)[dB]
on port A
CHA_TX_VOICE_LEVEL 0 down to –20
-7
Rx Level *(-1)[dB]
on port A
CHA_RX_VOICE_LEVEL 0 down to –20
-7
Tx Level *(-1)[dB]
on port B
CHB_TX_VOICE_LEVEL 0 down to –20
-7
Rx Level *(-1)[dB]
on port B
CHB_RX_VOICE_LEVEL 0 down to –20
-7
16.20 Telephone and Fax/Modem/Phone port impedance
Can be configured by SMS (see page 83)
Can be configured by FTP (see page 84)
You can adjust the input impedance of the
Telephone
and
Fax/Modem/Phone
port
separately. You can select 600R, 900R or a complex matching.
Section:
DIALING
Parameter
Permitted Values
Factory Setting
Input Impedance
Port A
CHA_INPUT_IMPEDANCE REAL600,
REAL900,
COMPLEX
COMPLEX
Input Impedance
Port B
CHB_INPUT_IMPEDANCE REAL600,
REAL900,
COMPLEX
COMPLEX
16.21 GPRS Configuration
Can be configured by SMS (see page 83)
Can be configured by FTP (see page 84)
Can be configured by AT-command (see p. 63)
To set-up GPRS connections, the PDP_CONTEXT for this connection must be
specified in the
para.ini
file. For each GPRS provider an own section has to be created
in the parameter file. For some GPRS providers the configuration is already pre-
configured:
