Configuration
28 TELSAT
GPRS
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
8.3.3
Call forwarding if no answer (CFNRy)
If
call forwarding if no answer
is activated, incoming calls will be forwarded to the
configured telephone number, if the call is not answered by a connected telecomms
equipment. You can configure this for each type of call (voice, data, fax) independently.
You can also configure the delay after the call is forwarded.
To change the setting enter the following sequence:
Description:
**61*
<Telnumber>
#
Activates for all call
types
**61*
<Telnumber>
**
<delay_time>
#
Setting the delay after
which the call is
forwarded for all call
types
**61*
<Telnumber>
*
<call_type>
#
Activates for the selected
call types (see below)
**61*
<Telnumber>
*
<call_type>
*
<delay_time>
#
Specifies the target
number, the call type
and the delay.
##61#
Deactivates call
forwarding if no answer
*#61#
Status Checking (see
p.30)
Meaning:
<Telnumber>
= the telephone number, the call will be forwarded to
<delay_time>
= the delay, after which the call is forwarded in seconds
<call_type>
=
11
: Incoming
phone calls
will be forwarded.
<call_type>
=
13
: Incoming
fax calls
will be forwarded.
<call_type>
=
25
: Incoming
data calls
will be forwarded.
Both prefix commands
*
and
**
are supported to activate the service.
Both prefix commands
#
and
##
are supported to deactivate the service.
