Parameters in the file para.ini: advanced configuration
TELSAT GPRS
93
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
Fax Identification
[Can be configured by SMS, FTP] When you send a fax by your local fax
machine via the TELSAT GPRS to a remote station, your local fax machine
will show the Fax Identification configured in this parameter. This is necessary
because of the special mechanism required to transmit the fax via the GSM
network. When receiving a fax with the local fax machine, the identification of
the remote fax machine will be shown.
IDENT=<TELSAT GPRS>
16.12 Billing Tone configuration
Can be configured by SMS (see page 83)
Can be configured by FTP (see page 84)
The TELSAT GPRS can generate billing pulses on the
Phone port
and on the
Fax/Modem/Phone
port.
Enable/Disable
This feature can be activated or deactivated for both ports separately
[CHA_BIILING_ENABLED, CHB_BIILING_ENABLED].
Text Pulse Frequency
The TELSAT GPRS can generate billing pulses with a frequency of
12kHz [CHx_16KHZ_BURST=No], or
16kHz [CHx_16KHZ_BURST=Yes].
Tax-pulse cadence
The duration of the tax-pulse can be selected with this parameter:
CHx_PULSE_DURATION
CHx_PULSE_DELAY
tax-pulse level
The tax-pulse signal level can be adjusted with the following parameter:
CHA_PULSE_LEVEL
e.g.: CHA_PULSE_LEVEL=2,5.
