Fax 4440 / MF 4461
- 12 -
2 - Installation
1
Remove the paper feed cassette completely
.
2
Push the lower panel down until it clicks.
3
Setup the back side feed cassette stop by pushing
the "PUSH" lever (
A
).
Then adjust the lateral paper guides to the paper
format by pushing lever (
B
) located on the left
guide. Adjust the length paper guide to the paper
format by pushing lever (
C
).
4
Take a paper stack, pull the paper off and align it
on a flat surface.
5
Put the paper stack in the feed cassette
(200 sheets for 80 g/m² paper for instance).
6
Put the feed cassette back in its location.
Cartridge installation
1
Stand in front of the machine.
2
Push the left and right sides of the cover and pull it
at the same time towards you.
3
Unpack the cartridge and hold it by its handle.
4
Insert the cartridge in its slot by pushing it until it
clicks (last move down) as shown on the picture
below.
5
Close the cover.
You can use paper weighing between
60 and 105 g/m2.
PUSH
B
A
C