Sage SIE Series, Руководство по эксплуатации и инструкция

Страница: 71 / 75

O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
71
S A G E M E T E R I N G , I N C .
REV. 03-SIE/SRE
CHARACTER LOCATIONS:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
FOOTNOTES:
1. Your meter can be configured for up to four channels (A, B, C and D)
2. Channel: If only one channel, the “A” will be blank, unless
channels are in external mode; This position also reserved for Relay
2 Status (i.e., Relay On [^])
3. This position reserved for over-range condition (>) and other sym-
bols (see symbols on bottom of page 49). If over-ranged, display will
continue, but output still 20ma
4. This position reserved for Relay 1 Status (i.e., Relay On [^])
5. Max 7 digits for flow rate (if no decimals), and always a space
between the units
6. See table at right for flow rate units that are available (factory or
user selectable)
7. Temperature can have a minus sign (if negative), but no decimals.
C or F units (no space). Temperature will blank if needed by Total.
8. Max 7 digits when temp is displayed. Max 12 digits for total
(if no decimal and if temperature blank)
9. See table at right for totalized units that are available (factory or
user selectable)
10. Note: When totalizer exceeds 7 digits, it will take precedence over
temperature reading, and blank out the entire temperature reading,
allowing 12 digits of total. If this feature is not desired, then disable
totalizer.
B
1
1 8 3 • 7 4 4 S C F M
1 2 5 F 2 3 5 6 • 9 S C F
2
Flow Rate (max of 3 decimals)
5
Flow Rate Units
6
Total (max of 2 decimal places)
8
Totalized Units
9
3 4
Temperature
7
Engineering Units
KG/
LB/
NCM
NMP
SCC
SCF
SFP
SLP
Custom Units
DAY
HOUR
MINUTE
SECOND
Appendix