Sage SIE Series, Руководство по эксплуатации и инструкция

Страница: 49 / 75

O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
49
S A G E M E T E R I N G , I N C .
REV. 03-SIE/SRE
POWER-UP
On Power-up:
First screen = “Initializing System”; next = “Sage
Metering SNxxxxxx”; then FLOW METER Display
which consists of: Flow Rate (top line); Temperature
and Totalized Flow (bottom line). Top line may also
display the following Status Symbols (!, <, >, B, C, D)
described in “SYMBOLS”)
During FLOW METER Display:
■
Press FLOW/SHIFT to bring up first Menu (MAIN
MENU), and repeat for other Menus (DISPLAY
OPTIONS, etc). Menu titles are on the top line,
Items are on the bottom line — see page 45–46
for details [to return to FLOW METER Display,
Press and Hold FORWARD/UP, then Press
FLOW/SHIFT]
■
Press FORWARD/UP or BACK/DOWN to scroll
through Items on the bottom line [to return, Press
and Hold FORWARD/UP, then Press FLOW/SHIFT]
■
Press SELECT/SET to preview the Contents of an
Item (to scroll through other Item Contents, press
FORWARD/UP or BACK/DOWN) [to return, simply
Press FLOW/SHIFT]
TO CHANGE VALUES OF MENU ITEMS
During FLOW METER Display:
■
Press SELECT/SET to bring up “Enter Passcode”. Blink -
ing character indicates NUMERIC-ENTRY mode
■
Enter the factory default Passcode of 99999 (Easiest
Sequence: Press Back/Down, then Select/Set, repeat
five times, then Select/Set to unlock the meter).
■
If wrong Passcode, it “asks” again — Select/Set to
reenter, or to return to FLOW METER Display,
Press and Hold FORWARD/UP, then Press
FLOW/SHIFT
■
Press FLOW/SHIFT repeatedly to bring up desired
Menu (to return to FLOW METER Display, Press
and Hold FORWARD/UP, then Press FLOW/SHIFT)
■
Press FORWARD/UP or BACK/DOWN to scroll
through Menu Items (to return to FLOW METER
Display, Press and Hold FORWARD/UP, then Press
FLOW/SHIFT)
■
Press SELECT/SET to preview the Contents of an
Item (note blinking characters, since meter is
unlocked)
■
Make changes as needed. See “NUMERIC ENTRY
MODE” to accept change
■
Note: You can change Max Value (Item 210) higher
than the original Full Scale (FS) calibration range,
but accuracy may be effected.
NUMERIC ENTRY MODE
■
FLOW/SHIFT: In NUMERIC-ENTRY mode press to
move the cursor to the left (value “accepted” when
character no longer blinks [to return to FLOW
METER Display after value accepted, Press and
Hold FORWARD/UP, then Press FLOW/SHIFT])
■
SELECT/SET: In NUMERIC-ENTRY mode, press to
move the cursor to the right (value “accepted”
when character no longer blinks [to return to
FLOW METER Display after value accepted, Press
and Hold FORWARD/UP, then Press FLOW/SHIFT])
■
FORWARD/UP: During NUMERIC-ENTRY mode,
press to scroll through numbers and symbols
■
BACK/DOWN: During NUMERIC-ENTRY mode,
press to scroll through numbers and symbols
COMMON SHORTCUTS
■
To return to FLOW METER Display from Menu
(Top Line), Press and Hold FORWARD/UP, then
Press FLOW/SHIFT. (Only works if a Menu is on
Top Line.)
■
To return to FLOW METER Display from Item (Top
Line), Press FLOW/SHIFT (unless in Numeric Entry)
■
To view Serial Number when in FLOW METER
Display, Press BACK/DOWN
■
Range Changing Shortcut depends on Meter
Revision Number. See page 56, “Range Changing
Shortcut” for details.
■
To change Display Contrast, Hold FLOW/SHIFT as
meter is being powered up. The Display Contrast
Menu will come up.
■
Power Down to Reset — See “POWER UP”
SYMBOLS
■
! = Output Locked; < = Below Flow Cut Off;
SDB? = Sensor Driver Board has lost communica-
tion (possibly a board is loose, or a component has
failed); >Exceeds Full Scale Setting; ^ = Relay On; B,
C, D = Selected Channel. Note: If in External Mode
(see item 704), the “A” will appear when Channel
A is selected. Otherwise Channel A will have no
symbol.
Detailed Keypad Navigation and Menus
(SEE PAGE 44 FOR SIMPLIFIED KEYPAD INSTRUCTIONS)