Sage Oracle Touch SES990, Быстрое руководство

Страница: 6 / 48

10 11
EN
HOT WATER
The HOT WATER function can be used to
pre-heat cups or add hot water manually.
To start & stop hot water, touch ‘Hot Water’
on the screen.
ADDING NEW DRINK
Touch ‘Create New’ in the menu screen to create
a customised drink. You can adjust parameters
based on a standard style and save your own.
Alternatively, after manually adjusting parameters
touch the small icon to save the current setting.
SETTINGS
To enter settings menu, touch the icon
on the upper right on the screen.
TRANSPORTING AND STORING
We recommend draining both boilers completely
before transporting the machine or storing for an
extended period of time. Refer to the Descale
section for the step by step instructions.
This procedure is also intended as an anti-freeze
measure in the event the machine is exposed
to extreme cold temperatures.
AUTO OFF MODE
The machine automatically switches
to AUTO OFF mode after 30 minutes.
COLOUR TOUCH SCREEN DISPLAY
Please keep the touch screen dry and clean
to ensure that the machine functions properly.
CLEANING CYCLE
• A message for cleaning will be displayed to
indicate when a cleaning cycle is required
(approx. 200 shots). Or you can start cleaning
cycle by choosing ‘Clean Cycle’ in ‘Settings’.
The cleaning cycle cleans the shower screen
and back-flushes the group head.
• Follow the instruction on the touch screen.
INSTALLING THE WATER FILTER
Refer to page 7.
Care & Cleaning
CLEANING CONICAL BURRS
Regular cleaning helps the burrs achieve consistent grinding results which is especially important when
grinding for espresso.
13
1 2 3 4 5
6 7 88 9 10 11
12 14 15
Burr
brush
Tamp removal
magnet
Grind outlet
brush
Unlock hopper
Remove upper
burr
Push upper
burr firmly into
position
Remove beans
Clean upper
burr with
burr brush
Lock upper burr
Replace & lock
hopper
Clean lower
burr with
burr brush
Insert hopper
Run grinder until empty
Remove tamping
fan with tamp
removal magnet
Lock hopper
Clean grind
outlet with grind
outlet brush
Unlock & remove
hopper
Replace tamping
fan by hand