MorphoAccess® VP Series - User Guide
Section 7: Access control by Authentication
67
M
ORPHO DOCUMENT
.
R
EPRODUCTION AND
D
ISCLOSURE
P
ROHIBITED
SSE-0000082427-01
January 2011
No biometric check, but User ID check
Description
This authentication mode is the version of the “
Biometric check, biometric data in
local database
” authentication mode, when biometric check is disabled.
The user’s identifier is the only data read on user’s card. The MorphoAccess®
terminal checks if the user’s identifier exists in the database.
The access is granted if the user’s identifier read on the user’s card is found in the
internal database. Otherwise (user’s identifier not found in the database), the access is
denied.
User’s data required in the terminal
This mode requires a local database, and a record must be created for each allowed
user. Each record contains:
•
The same identifier as the one on the user’s card
•
The reference biometric data of two fingers of the user.
If the terminal doesn’t found a record with the user’s identifier read on the card, the
access is denied.
The size and the management of the MorphoAccess® terminal internal database is
described in
MorphoAccess® Terminal Database management
section.
User’s data required on the user’s card
The only data required on the user’s card is the user’s identifier.
The terminal is able to read the user’s identifier either stored according to
TLV format
or to be read directly at a given offset on the card (
binary format
).
All other data found on the card is ignored.
Contactless smartcard logical structure is described in
MorphoAccess® Contactless
Card Specification
document.
Activation keys
This function requires several configuration keys.
Authentication process without biometric check, but User ID is searched in database
app/bio ctrl/authent ID contactless = 1
Enabled
app/bio ctrl/bypass authentication = 1
Enabled
