PA-654 Rev. C / 10-00
Models STP-36
Packing List
Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
(440) 248-0400
Fax: (440) 248-6168
Figure 1
Model STP-36
Introduction
This document contains information necessary to successfully install your hardware.
WARNING
The STP-36 is not intended for use in circuits carrying voltages in excess of 30V RMS,
42.4V peak, or 60VDC.
General definitions
The types of product users are:
Responsible body
is the individual or group responsible for the use and maintenance of equipment, and for ensuring that oper-
ators are adequately trained.
Operators
use the product for its intended function. They must be trained in electrical safety procedures and proper use of the
instrument. They must be protected from electric shock and contact with hazardous live circuits.
Maintenance personnel
perform routine procedures on the product to keep it operating, for example, setting the line voltage
or replacing consumable materials. Maintenance procedures are described in the manual. The procedures explicitly state if the
operator may perform them. Otherwise, they should be performed only by service personnel.
Service personnel
are trained to work on live circuits, and perform safe installations and repairs of products. Only properly
trained service personnel may perform installation and service procedures.
