MorphoAccess® VP Series - User Guide
Section 9:
Proxy (or slave) Mode
SSE-0000082427-01
M
ORPHO DOCUMENT
.
R
EPRODUCTION AND
D
ISCLOSURE
P
ROHIBITED
80
January 2011
Description
Scope
The Proxy mode is an operating mode where the access control main application is
located in a distant system. This is not a standalone mode like Identification and
Authentication modes.
It means that the terminal becomes a slave of the host system application. The access
control application is running on the host system and used MorphoAccess® terminal
high level functions:
•
Identification function
•
Authentication function
•
Read data on a contactless card
•
Access control result signal command
Figure 32: Proxy (slave) mode
The MorphoAccess® VP Series terminal is driven through an Ethernet (or Wi-Fi™)
link using TCP or SSL protocol.
The MorphoAccess® terminal acts as a server: it is either waiting for a command or
executing a command.
The commands allowed by the MorphoAccess® terminal are described in the
MorphoAccess® Host System Interface Specification
document.
For further details about SSL on the MorphoAccess® terminal, please refer to the
SSL
Solution for MorphoAccess®
documentation.
