MorphoAccess® SIGMA Extreme Series - Installation Guide
Identity & Security
Section 5 :User Interface
54
This document and the information therein are the property of
Safran Identity & Security
.
They must not be copied or communicated to a third party without the prior written authorization of Safran
2017_2000024418 - V1
Configuring the terminal
MorphoAccess® SIGMA Extreme Series terminals are standalone biometric systems
which offers advance features for access control. MorphoAccess® SIGMA Extreme
Series terminals are equipped with a facility to support the MorphoAccess® and
Bioscrypt legacy systems.
When MorphoAccess® SIGMA Extreme Series terminal is set in any of the legacy
modes, it supports the database structures and configurations of the selected legacy
system. When the terminal is booted for the first time, user can select any of the
following modes:
MorphoAccess® 500 or J Series legacy mode
MorphoAccess® SIGMA Extreme Series terminal can be operated in MorphoAccess
®
500 or J series mode (also referred as Legacy Morpho). In this mode, the terminal will
support configurations and operations of MorphoAccess
®
500 series terminals.
Terminal can authenticate users enrolled in the MorphoAccess
®
500 series terminal,
using biometric check as well as contactless card. New users can also be enrolled in
MorphoAccess
®
500 series mode.
Once the product is configured in Legacy Morpho mode, the following methods can be
used to configure the terminal:
through the Ethernet interface (remote management)
through a Wi-Fi™ connection (license and dongle required)
Configuration procedures are described inside the MorphoAccess® SIGMA Extreme
Series Administration Guide as follows:
Section 4: Terminal Configuration And Administration
