MULTILUBE
INSTALLATION AND MAINTENANCE
HINS4AEN.doc
24.08.2006 Rev. 4A
4 (18)
1.3 Installing the safety switch
Warning
Pumping unit models with power input 230 V or 115 V have to be equipped
with a safety switch (e.g. Safematic code 10543062).
Installing the safety switch:
1. Install the safety switch next to the pumping unit (Figure 7).
2. Feed cable into the safety switch as shown in Figure 8.
3. Electrical connections are made according to a separate electrical drawing which is
delivered with the pumping unit.
Warning
Electrical connections may only be made by a qualified electrician.
Figure 7.
Safety switch next to
the pumping unit
Figure 8.
Cable inside the
safety switch
