MULTILUBE
INSTALLATION AND MAINTENANCE
HINS4AEN.doc
24.08.2006 Rev. 4A
17 (18)
7 REMOVING AIR FROM THE PUMPING UNIT
Remove air from the pumping unit, if there is air mixed with the lubricant e.g. in connection with
the filling of the lubricant reservoir.
Removing air from the pumping unit:
1. Disconnect the main line connections.
2. Start the pumping unit.
3. Open the pumping element deaerating screw.
4. Pump until only lubricant is coming out of the deaerating screw (no air).
5. Tighten the deaerating screw.
6. Connect the main line connections.
Figure 49.
Opening the deaerating screw
8 CONTACT INFORMATION
Oy SKF Ab
P.O. BOX 80
40951 MUURAME
FINLAND
Tel. +358 14 600 611
Fax. +358 14 600 600
WWW: www.SKF.com
