MULTILUBE
INSTALLATION AND MAINTENANCE
HINS4AEN.doc
24.08.2006 Rev. 4A
10 (18)
3.2 Fastening of the shell
1. Connect the cable of user interface IF-103.
2. Ensure with the help of screwdriver that the rubber seal is set correctly
(Figures 26 and 27).
Warning
Make sure that the protective grounding wire of the shell is connected
(Figure 28).
3. Install the cover (Figure 29).
Figure 26.
Make sure that the
rubber seal is set
correctly inside the
shell
Figure 27.
Make sure that the
rubber seal is set
correctly outside the
shell
Figure 28.
Connecting the
protective grounding
wire
Figure 29.
Installing the cover