Airfield Lighting
Safegate Group
Manual
Date: October 2016
Ref: SL-RE-E_SL-RT-E_SL-RN-E_SL-RTN-E_SL-SB-E
Version: 1.4
Page 19 of 42
2.6
SET THE LIGHT FIXTURE
Set the light fixture
Image example
Adjustment of the light fixture is possible
by 4 degrees in all directions to allow
levelling of the fixture after installation.
1. Loosen (but do not remove) the
three setting screws (M6x20 mm) on
the fixture with an allen key.
FIGURE 16 - LOOSEN THE SETTING SCREWS
2. Adjust the light fixture to desirable
orientation. A sight device should be
used for this step. Read more about
the sight device in
2.6. Sight device
for bi-directional light fixture.
3. Fasten the three setting screws
using an allen key, make sure to
hold the light fixture in its position
when tighten the screws so that it
does not turn.
FIGURE 17 - ADJUSTMENT IN ALL
DIRECTIONS
1
1
