Airfield Lighting
Safegate Group
Manual
Date: October 2016
Ref: SL-RE-E_SL-RT-E_SL-RN-E_SL-RTN-E_SL-SB-E
Version: 1.4
Page 17 of 42
2.3.2
SafeLED IQ0 and SafeLED IQ1 Schematic Installation Example
It is important to keep track of the positioning of the SafeLED IQ0 and SafeLED IQ1
light fixtures in the bases in order to program the ASP parameters correctly (See
section 3.1.1).
FIGURE 13
– IT IS IMPORTANT TO KEEP TRACK OF AND TO CORRECTLY ORIENT THE A AND B MARKINGS ON THE
LIGHT FIXTURES WHEN INSTALLING LIGHT FIXTURES ON A RUNWAY. THE FIGURE SHOWS AN EXAMPLE OF A
RUNWAY. NOTE HOW THE A AND B MARKINGS VARY ALONG THE THRESHOLD, EDGE, AND END
2.4
TOOLS REQUIRED
The following tools are recommended for installation:
Allen keys
A wrench
One brush or cloth
Sight Device
NOTE: Provided that the base intended to receive the light fixture has been properly
installed, no other specific tool is required.
