Airfield Lighting
Safegate Group
Manual
Date: October 2016
Ref: SL-RE-E_SL-RT-E_SL-RN-E_SL-RTN-E_SL-SB-E
Version: 1.4
Page 38 of 42
4.6
REPLACE THE OMNI MODULE
Replace the omni module
Disassemble
1. Unscrew the 4 screws attaching the top
cover to the bottom cover.
2. Unscrew the 2 screws on the top of the
light fixture.
3. Remove the glass holder.
4. Place the PFTE disc on top of the glass.
5. Remove the glass dome.
6. Remove the gasket.
7. Unscrew the 2 screws attaching the omni
module to the top cover.
8. Disconnect the 4 led cables and remove
the omni module.
FIGURE 54
– DISASSEMBLE
Assemble
1. If the led cables connected to the
converter have been removed to ease the
disassembling of omni module, make sure
to connect the cables as shown in
4.7 LED
Cable connections to the converter
.
2. Connect the 4 led cables and place the
new omni module in its position.
3. Fasten the 2 screws holding the omni
module with a torque of 1 Nm.
4. Place a new gasket in its position.
5. Place the glass dome in position.
6. Place the PFTE disc on top of the glass.
7. Place the glass holder in position.
8. Fasten the 2 screws on the top of the light
fixture with a torque of 3 Nm.
9. Fasten the 4 screws attaching the top
cover to the bottom cover with a torque of
4,5 Nm.
FIGURE 55
–REASSEMBLE
4.7
LED CABLE CONNECTIONS TO THE CONVERTER
LED cable connections to the converter
Assemble
1. It is very important that the led cables are
connected to the converter shown in figure
56.
2. Incorrect connection may damage the
converter!
FIGURE 56
– LED CABLE CONNECTION
