SAEVO Sonic Duo, Руководство пользователя

Страница: 14 / 68

14
of any damaged, loose or removed enclosures or parts of the equipment before using the
equipment again.
• Do not touch the equipment or use it if it is being repaired or if the equipment's cabinets
have been removed.
• Do not open or remove any of the equipment's cabinets. No internal parts can be repaired
by the user.
• In case of falling or impact of moving parts causing it to break, be careful when handling
them, there may be sharp parts.
• The operator cannot come into contact with the patient when in contact with accessible
connectors.
• The operator cannot use tools to open the equipment.
• When using the product, the dental tip can reach the normal use temperature of 114.2 ° C.
That if you are in contact for more than 1 min there may be a risk of slight superficial burns
or irritation.
• If there are obstructions or blockages in the cooling system, the tip can reach a maximum
rate of temperature increase of 63% (179.7 ° C). That if you are in contact for more than 1 min
there may be a risk of slight superficial burns or irritation.
• Turn off the equipment if it is not in use for a long time
• All parts that have been in contact with the patient must be cleaned and disinfected / sterilized
with each new patient to prevent the transmission of infectious agents that can cause serious illness.
• Perform cleaning and disinfection / sterilization according to instructions contained in this manual.
• Do not unplug the cable or other connections unnecessarily.
• Do not modify any part of the equipment.
If the equipment shows any abnormality, check if the problem is listed in any item listed in the “Problem
diagnosis” topic of this user manual.
If it is not possible to solve the problem, turn off the equipment, contact an Alliage Authorized Technical
Assistance.
• For each new patient, perform cleaning, disinfection / sterilization procedures and according to
the instructions contained in this manual.
Cross contamination prevention
After using / operating the equipment
Precautions in case of alteration of the equipment operation
Adequate cleaning and disinfection / sterilization measures should be taken
to avoid cross-contamination between patients, users and others.
The manufacturer is NOT responsible:
• If the equipment is used for purposes other than those for which it was
designed.
• For damage caused to the equipment, the operator and / or the patient, as a
result of incorrect installation and maintenance procedures that do not comply
with the operating instructions that accompany the equipment.