SAEVO Sonic Duo, Руководство пользователя

Страница: 43 / 68

43
6.1.SOLUTION OF PROBLEMS
6.TROUBLESHOOTING
Occasionally, malfunctions may occur during use. In the event of an error, restart the equipment and
resume operation. If the problem persists, follow the instructions below.
Failures Probable causes Solutions
- Inoperative Equipment. - Plug disconnected. - Connect the plug to the outlet.
- Lack of power in the
ultrasound.
- Deformed tip.
- Tip loose.
- Misuse (incorrect angle of at-
tack).
- Replace the Tip.
- Tighten the Tip with the key.
- See item “Techniques and ap-
plications”.
- There is no water in the
pens.
- Inadequate water supply pressure.
- Poor regulation of the water flow.
- Correct the water pressure.
- Adjust the water flow through
the water register for ultrasound.
- Insufficient bicarbonate
in the jet.
- Bicarbonate is missing in the
container.
- Blockage at the outlet of the
container or at the spout.
- Excess bicarbonate in the con-
tainer.
- Inadequate jet position.
- Add bicarbonate in the container
(max. 40g).
- Remove the blocked parts with
the plunger.
- Remove the excess.
- See item “Techniques and ap-
plications”.
- The jet lacks pressure. - Poor regulation of the air flow.
- Air supply pressure below spe-
cified.
- Adjust the air flow in the re -
gulator.
- Adjust the supply pressure of
the device (max. 80 PSI).
- Peristaltic pump does
not work.
- Lack of water or antiseptic liquid
in the reservoir of the peristaltic
pump.
- Internal hose of the peristatic
pump damaged due to friction of
the rollers.
- Put water or antiseptic liquid
in the reservoir of the peristaltic
pump.
- Carry out the replacement of
the inner tube of the peristaltic
pump (ask for the presence of an
authorized technician Alliage).
If problems persist, contact the Alliage Service Department.