SAEVO Sonic Duo, Руководство пользователя

Страница: 61 / 68

61
11.ELECTROMAGNETIC COMPATIBILITY
11.1.GUIDANCE AND DECLARATION FOR ELECTROMAGNETIC EMISSIONS
The Equipment for Prophylaxis by Ultrasound / Bicarbonate Jet is intended for use in the
electromagnetic environment specified below. The buyer or user should ensure that it is used in
such an environment.
The Equipment for Prophylaxis by Ultrasound / Bicarbonate Jet is suitable for use in a professional
health care environment, not including areas where sensitive equipment or sources of intense
electromagnetic disturbances are present, such as the RF shielded room of a magnetic resonance
imaging system. , in operating rooms close to active AF surgical equipment, electrophysiology
laboratories, armored rooms or areas where short wave therapy equipment is used.
The following tables provide information on the equipment's compliance with the ABNT NBR IEC
60601-1-2: 2017 standard.
Emissions Tests Compliance Electromagnetic Environments - guidelines
RF emissions CISPR 11 Group 1 The Equipment for Prophylaxis by
Ultrasound / Bicarbonate Jet
uses RF
energy only for its internal functions.
Therefore, its RF emissions are extremely low
and are unlikely to cause any interference
in nearby electronic equipment.
RF emissions CISPR 11 Class A
The Equipment for Prophylaxis by
Ultrasound / Bicarbonate Jet is suitable
for use in all establishments, except
households and those directly connected
to the public low voltage power supply
network that powers buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuation /
Scintillation emissions
IEC 61000-3-3
Compliant
Note : The emission characteristics of this equipment make it suitable for use in industrial areas
and hospitals (IEC / CISPR 11, Class A). If used in a residential environment (for which IEC / CISPR
11, Class B is normally required), this equipment may not provide adequate protection for radio
frequency communication services. The user may need to take mitigation measures, such as
relocating or redirecting equipment.