SAEVO Sonic Duo, Руководство пользователя

Страница: 30 / 68

30
3.8.SYSTEM REQUIREMENTS
3.8.1.Compressor requirements
3.8.2.System layout
The compressor is required to provide compressed air for clinical and laboratory use, having stable
performance and flow capacity in accordance with the minimum requirements for the installation
of the Ultrasound / Bicarbonate Jet Prophylaxis Equipment, in addition to being oil and emission
free. smoke, vapors or unpleasant odors.
It must have a safety system with a valve that goes into operation to release the pressure in case
the pressure switch fails and also an overload protector in order to protect the equipment from
overheating. The location of your installation should be an airy place, preferably outside the office
and should not be installed in sanitary facilities such as bathrooms and toilets, in order to minimize
the contamination of the air used in the offices.
For the safety of the patient, the operator and the perfect functioning of the product, the installation
of the compressor must respect the following recommendations:
Install a pressure relief device next to the compressor;
Install an air filter with pressure regulator, thus preventing oil, moisture and solid particles from
entering the office and subsequently reaching its vital parts, such as; valves, pen, etc.;
Install the compressor close to the supply point to avoid losses;
In installations, preferably use rigid copper tubes. The pipes can also be made with galvanized steel,
stainless steel, nylon or polyethylene tubes.
Pressure limit of 80 psi;
Flow rate limit ≥ 47 Nl / min;
Humidity limit between 40 and 60%;
Oil contamination limit of 0.5 mg / m³;
Particle contamination limit <100 particles / m³ (particles between 1 and 5μm in size);
Air quality regulations are in accordance with the laws of each country.
*
Do not accompany the product
*