25
NOTES
- For oscillatory files, the configurations, including speed and torque, can’t be adjusted.
- The oscillatory files distinguish themselves from the continuous ones because of their
special design:
The spiral is inverted and the shaft is equipped with a colored plastic ring.
- On the reciprocating movement, the auto-reverse function is off.
- On the reciprocating movement, you can hear a sound when the load approximates
the limit value for the torque. If this happens, do not press the file inside the root canal.
Remove it from the canal and clean the stretch marks.
- If the maximum torque is achieved, the motor will stop. Should this happen, remove the
file from the radicular canal, clean the stretch marks and restart.
- When the equipment is connected to the charger, it will automatically turn off
(nonoperating).
Automatic Shutoff:
- The equipment will automatically turn off when it’s not in use for more than 3 minutes.
To turn it on again, press the onn/off button.
ATTENTION
Low battery warning:
The LCD Display shows the actual charge of the battery, when the scale is full, it means
the battery charge is complete. If there is not enough charge, the scale will blink, meaning
that the charge is about to go away. At this point, the beep will sound for 3 seconds and
the instrument will turn off after 60 seconds.
To recharge the battery completely you should connect the equipment to the charger for,
at least, 4 hours. (A new battery should be charged for 8 hours or more) The sign will be
ON during the battery charging time.
- The battery doesn’t present the memory effect and can be recharged even if it is not
completely charged.
EQUIPMENT OPERATION
