24
Examples of programmings:
N.cm
N.cm
N.cm
N.cm
N.cm
N.cm
N.cm
N.cm
N.cm
0.3
2.7
3.3
1.3
2.3
3.8
1.8
3.0
4.0
Systems of oscillatory files
The WaveOne™ and RECIPROC® files are specifically conceived for use in reciprocating movement,
which the instrument is propelled first in a cutting direction and then the movement is inverted
to release the instrument. The oscillatory angles are precise and specific for the design of the
instrument and for the Endus Duo R.
NOTES
- The programmings can only take place on the M2 Mode.
- The programmings will be saved for all the modes even after the equipment has been
turned off.
WARNINGS
- Follow the manufacturer’s instructions for the utilization of the endodontics files.
- Do not use own files for reciprocating movement in continuous spinning. Risk of fractures
and other clinical problems.
- Do not use own files for continuous spinning in reciprocating movement. Risk of fractures
and other clinical problems.
- When the equipment is in use, please, do not use the battery charger to avoid
electromagnetic interference.
EQUIPMENT OPERATION
