17
INSTALLATION OF EQUIPMENT
01
02
03
The installation procedure is simple. Follow the steps below to correctly install the product.
- Position the equipment on a firm and leveled place.
- Connect the plug of the battery charger in the main unit –
only for recharge (fig.01).
The battery comes already installed, even though it needs an
initial charge.
Main unit
01
NOTE
Charge the battery for
08 hours
before using the
equipment for the first time.
- Leave the battery charging for at least 4 hours.
Connect the measurement cable
to the main unit (fig.02).
Configuring for the MODE M1 – Apex Locator
03
Connect the labial clip (A) and file support (B) to the
measurement cable (fig.03).
ATTENTION
Always hold by the connectors to connect or
disconnect the cables.
a
b
