Saeco Minuto, Руководство по обслуживанию

Страница: 18 / 109

MINUTO 03 USER INSTRUCTIONS
Page / 13
The machine needs to be descaled. Press the “ ” button to start the descaling
process. Follow the steps described in the “Descaling” chapter of this manual.
If you want to descale later, press the “ ” button to continue using the machine.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.
Completely insert the drip
tray with the coffee grounds
drawer into the machine
and close the service door.
The machine is heating up to
brew beverages or dispense
hot water/steam.
The machine needs the
“” water fi lter to be
replaced.
The brew group is being reset
due to machine reset.
The machine automatically
primes the water circuit.
Re fi ll the coffee bean hopper
with coffee beans and restart
the cycle.
The machine is performing
the rinse cycle. Wait until the
machine has completed the
cycle.
Fill the coffee bean hopper and
re fi t the lid.
The brew group must be inserted
into the machine.
Empty the coffee grounds
drawer. Wait about 5 seconds
before reinserting it.
Fill the water tank.
Turn off the machine. After 30 seconds, turn it on again. Try this 2 or 3 times.
If the machine does not start, contact the Philips SAECO hotline in your country
and quote the error code shown on the display. The contact details can be found in
the warranty booklet packed separately or on www.philips.com/support.
Machine ready signals (YELLOW colour)
Machine ready signals (RED colour)
Exx
02