MINUTO 05 TROUBLESHOOTING
Page / 46
The machine passes to the level 5 (Heater-Grinder)
The machine passes to the level 5 (Heater-Grinder)
Press the STEAM button to switch on the grinder
Press the STEAM button to switch on the grinder
The grinder rotates and in the indication GRINDER the number increasing
up to 40. The other numbers inside the GRINDER box are not important
for this test.
ERROR:
ERROR:
The number remains 0 or the grinder does not run, the display
The number remains 0 or the grinder does not run, the display
backlight changes from green to red; check the Hall sensor board of the
backlight changes from green to red; check the Hall sensor board of the
Grinder, the Grinder, the wiring from the Hall sensor board to the CPU/
Grinder, the Grinder, the wiring from the Hall sensor board to the CPU/
POWER board (JP2) and the wiring from the Grinder to the CPU/POWER
POWER board (JP2) and the wiring from the Grinder to the CPU/POWER
board (JP8)
board (JP8)
ERROR:
ERROR:
In the indication HEATER appears “SHORT”, the NTC tempera-
In the indication HEATER appears “SHORT”, the NTC tempera-
ture-sensor is shorted, the display backlight changes from green to red;
ture-sensor is shorted, the display backlight changes from green to red;
check the wiring from the NTC temperature-sensor to the CPU/POWER
check the wiring from the NTC temperature-sensor to the CPU/POWER
board (JP13).
board (JP13).
ERROR:
ERROR:
In the indication HEATER appears “OPEN”, the NTC tempera-
In the indication HEATER appears “OPEN”, the NTC tempera-
ture-sensor is detached or broken, the display backlight changes from
ture-sensor is detached or broken, the display backlight changes from
green to red; check the wiring from the NTC temperature-sensor to the
green to red; check the wiring from the NTC temperature-sensor to the
CPU/POWER board (JP13).
CPU/POWER board (JP13).
Press the ESPRESSO button to switch on the Heater
Press the ESPRESSO button to switch on the Heater
The absorbed current ( Amperometer on the main supply) is OK, the
The absorbed current ( Amperometer on the main supply) is OK, the
indication HEATER changes from “OFF” to “ON” and the
indication HEATER changes from “OFF” to “ON” and the
temperature starts increasing.
temperature starts increasing.
If temperature is over 135°C, the backlight change from GREEN to
If temperature is over 135°C, the backlight change from GREEN to
YELLOW. This is a ALERT message to avoid heating the HEATER element
YELLOW. This is a ALERT message to avoid heating the HEATER element
over dangerous temperature.
over dangerous temperature.
ERROR:
the absorbed current is KO or the temperature does not
increase; check the wiring from the heater to the CPU/POWER board
(JP19) and the wiring of the NTC temperature-sensor (JP13).
Check the temperature
Check the temperature
The number shows the heater temperature .
The number shows the heater temperature .
06
Содержание Minuto
