Saeco auLika, Руководство по эксплуатации

Страница: 26 / 62

• 20 •
Machine Installation - Service Provider Manual
7 HANDLING AND
STORAGE
All the operations described in chapter 7 must
be performed exclusively by the service provid-
er or a specialised technician, who shall organ-
ise all operating sequences and employ suitable means
to ensure strict compliance with the safety regulations
in force.
7.1 Handling
During handling and transportation, the machine must be kept
in vertical position, according to the instructions printed on the
packaging. Care should be taken during lifting and positioning.
Do not shake the machine.
Make sure that no one is standing in the area dur-
ing lifting and handling of the load. In diffi
cult
conditions assign suitable personnel to monitor all move-
ments.
7.2 Storage
The machine should be stored in accordance with the following
conditions:
- Minimum temperature: above 4°C;
- Maximum temperature: below 40°C;
- Maximum humidity: below 95%.
The machine is packed in cardboard and expanded polystyrene
packaging.
Warning! Due to the total weight of the packaged
product, machines may not be stacked higher than
three units. The machine should be stored in its original
packaging, in a place FREE from humidity and/or dust.
8 INSTALLATION
All the operations described in chapter 8 must
be performed exclusively by the service provid-
er or a specialised technician, who shall organ-
ise all operating sequences and employ suitable means
to ensure strict compliance with the safety regulations
in force.
8.1 Safety Regulations
• Read the entire instruction manual carefully.
• The machine must be connected to the mains according to
the safety regulations in force in the country where the ma-
chine is used.
• Connection to the drinking water network (for water network
machines) should be made in compliance with the safety
regulations in force in the country where the machine is to be
used.
• The socket to which the machine is connected must be:
- Compatible with the type of plug installed on the ma-
chine;
- Suitably sized to comply with the data on the plate at-
tached to the bottom of the appliance;
- Connected to an effi cient earthing system.
• The power cord must not:
- Come into contact with any type of liquid: danger of elec-
tric shocks and/or fi re;
- Be crushed and/or come into contact with sharp surfaces;
- Be used to move the machine;
- Be used if damaged;
- Be handled with damp or wet hands;
- Be wound in a coil when the machine is in use;
- Be tampered with.
• If the power cord is damaged, it must be replaced by the
manufacturer or his service centre, or in any case by a person
with a similar qualifi cation.
• It is forbidden to:
- Install the machine other than as described in Chap. 8 or
outdoors.
- Install the machine in a location where water jets may be
used.
- Disable the safety measures installed by the manufacturer.
- Use the machine outdoors, next to fl ammable and/or ex-
plosive materials.
- Leave plastic bags, polystyrene, nails, etc, within the reach
of children, as they are potential hazards.
- Allow children to play near the machine.
- Use spare parts other than those recommended by the
manufacturer.
- Make any technical modifi cations to the machine.
- Immerse the machine in any kind of liquid.
- Wash the machine using a jet of water.
- Use the machine in any manner other than as described in
this manual.
- Install the machine on top of other appliances.
- Use the machine in explosive or harsh environments, or
with high concentrations of dust or oily substances sus-
pended in the air.